{"product_id":"modular-systems-ssbd7-1200l-a","title":"Modular Systems SSBD7-1200L\/A Left Inlet Single Sink Dishwasher Bench","description":"\u003ch2\u003eModular Systems SSBD7-1200L\/A Left Inlet Single Sink Dishwasher Bench 1200mm\u003c\/h2\u003e\n\u003cp\u003eThe Modular Systems SSBD7-1200L\/A is a 1200mm wide all-stainless steel dishwasher inlet bench with a single sink positioned on the left side, meaning the dishwasher inlet and sink are to your left when facing the bench. Built from 1.2mm SUS304 (18\/8) stainless steel throughout, it arrives flat-packed with an instruction manual and all required tools, making it straightforward to assemble and transport to site.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for commercial kitchen dishwashing runs, this bench pairs with an undercounter dishwasher to create a clean, hygienic workflow for incoming soiled ware. The fully welded and polished sink bowl, bevelled splashback, XPS-insulated benchtop, and adjustable disc feet combine to deliver a robust, low-maintenance workstation suited to busy service environments.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLeft-side inlet and sink positioning creates a logical soiled-to-clean workflow that reduces cross-contamination and keeps the dishwashing run organised during peak service.\u003c\/li\u003e\n  \u003cli\u003eFully welded and internally polished bowl eliminates crevices where food debris and bacteria can accumulate, making cleaning faster and supporting food safety compliance.\u003c\/li\u003e\n  \u003cli\u003eFlat-packed delivery with included tools and instruction manual simplifies transport through tight doorways and corridors, and allows quick on-site assembly without specialist tradespeople.\u003c\/li\u003e\n  \u003cli\u003eXPS board-lined benchtop with stainless steel panel backing reduces condensation and adds rigidity, protecting the work surface from heat and moisture damage over time.\u003c\/li\u003e\n  \u003cli\u003eFully adjustable polished stainless steel disc feet compensate for uneven floors, keeping the bench level and stable without shimming or modification.\u003c\/li\u003e\n  \u003cli\u003eOptional lockable castor kits allow the bench to be repositioned easily for deep cleaning or kitchen reconfiguration, then locked securely back in place during service.\u003c\/li\u003e\n  \u003cli\u003eStainless steel 'U' channel reinforcements beneath the benchtop scale with bench width, ensuring structural integrity is maintained across the full product range.\u003c\/li\u003e\n  \u003cli\u003eA 2-year parts-only warranty provides peace of mind and supports long-term operational reliability in demanding commercial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall dimensions: 1200mm wide x 700mm deep x 900mm high\u003c\/li\u003e\n  \u003cli\u003eSink bowl dimensions: 450mm wide x 450mm deep x 300mm high with 90mm diameter drain hole\u003c\/li\u003e\n  \u003cli\u003eLeft bowl positioning: when facing the bench, the dishwasher inlet and sink are on the left side\u003c\/li\u003e\n  \u003cli\u003e15mm wet edge to the bowl, minimising splash and spills onto the benchtop\u003c\/li\u003e\n  \u003cli\u003eAll stainless steel construction using 1.2mm SUS304 (18\/8) sheet throughout\u003c\/li\u003e\n  \u003cli\u003eSink bowl fully welded and polished both inside and out for hygiene and appearance\u003c\/li\u003e\n  \u003cli\u003eBenchtop lined with 15mm XPS (extruded polystyrene) board and a stainless steel panel for thermal insulation and surface strength\u003c\/li\u003e\n  \u003cli\u003eStainless steel 'U' channel reinforcements under the benchtop; number of channels increases with bench width\u003c\/li\u003e\n  \u003cli\u003eSplashback: stainless steel backed, 150mm high, 40mm thick, bevelled edges, fully enclosed\u003c\/li\u003e\n  \u003cli\u003eFour legs for this 1200mm bench (2100mm and 2400mm wide models use six legs); legs are 1.2mm stainless steel, 42mm diameter\u003c\/li\u003e\n  \u003cli\u003eFully adjustable polished stainless steel disc feet that complement the leg finish\u003c\/li\u003e\n  \u003cli\u003eLockable castor kits available as an optional accessory\u003c\/li\u003e\n  \u003cli\u003eSupplied flat-packed for ease of transport and storage\u003c\/li\u003e\n  \u003cli\u003eIncludes instruction manual and all tools required for assembly\u003c\/li\u003e\n  \u003cli\u003eSpecially designed for quick and simple self-assembly\u003c\/li\u003e\n  \u003cli\u003e2-year parts-only warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWidth (mm): 1200\u003c\/li\u003e\n  \u003cli\u003eDepth (mm): 700\u003c\/li\u003e\n  \u003cli\u003eHeight (mm): 900\u003c\/li\u003e\n  \u003cli\u003eWeight (kg): 41.3\u003c\/li\u003e\n  \u003cli\u003ePacked Width (mm): 770\u003c\/li\u003e\n  \u003cli\u003ePacked Depth (mm): 1270\u003c\/li\u003e\n  \u003cli\u003ePacked Height (mm): 530\u003c\/li\u003e\n  \u003cli\u003eWarranty (months): 2 Years Parts Only\u003c\/li\u003e\n  \u003cli\u003eCapacity (Litres): 1500\u003c\/li\u003e\n  \u003cli\u003eSplash Back: 150 mm high and 30 mm thick\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Modular Systems","offers":[{"title":"Default Title","offer_id":53965731594608,"sku":"SSBD7-1200L\/A","price":918.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/3674\/3536\/files\/ssbd7-1200l_a-1.jpg?v=1782918427","url":"https:\/\/atlanticequipment.com.au\/products\/modular-systems-ssbd7-1200l-a","provider":"Atlantic Equipment","version":"1.0","type":"link"}