{"product_id":"roband-heat-n-hold-food-warmer-fixed-glass-on-display-side","title":"Roband Heat ‘n’ Hold Food Warmer - Fixed Glass on Display Side","description":"\u003ch2\u003eRoband H200F Heat 'n' Hold Food Display Warmer\u003c\/h2\u003e\n\u003cp\u003eThe Roband H200F Heat 'n' Hold is an Australian-made food display warmer engineered to keep hot food at a consistent, safe serving temperature throughout the entire cabinet. Dual elements and dual fans circulate heat evenly, ensuring pies, pastries, pretzels, rotisserie chickens and other hot foods remain appetising in both appearance and taste for longer periods without quality degradation.\u003c\/p\u003e\n\u003cp\u003eBuilt from stainless steel 430 and fully insulated for energy efficiency, the H200F suits cafes, canteens, takeaways and busy service counters. Its dual-thermostat system with pre-heat timer, eight included bakers racks, easy-fill humidity trays and lift-off hinged doors make it a practical, operator-friendly solution for high-volume hot food service. The unit runs on a standard 10-amp single-phase power supply and is backed by a 12-month warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDual elements and dual fans deliver even, consistent heat across all eight rack positions, eliminating cold spots and keeping food quality high throughout service.\u003c\/li\u003e\n  \u003cli\u003eThe pre-heat thermostat lets operators rapidly bring the cabinet to a higher temperature before service or after frequent door openings, then automatically reverts to the holding temperature after up to 90 minutes.\u003c\/li\u003e\n  \u003cli\u003eHumidity trays slow moisture loss, helping pastries and other products retain their texture and appearance on display for longer.\u003c\/li\u003e\n  \u003cli\u003eCapacity for up to 200 pies across eight standard bakers racks means large volumes can be held ready to serve simultaneously, reducing replenishment frequency during peak periods.\u003c\/li\u003e\n  \u003cli\u003eRuns on a standard 10-amp single-phase outlet, simplifying installation without the need for dedicated high-amperage wiring.\u003c\/li\u003e\n  \u003cli\u003eLift-off hinged doors on the control side allow full racks to be loaded and removed quickly, speeding up restocking and end-of-day cleaning.\u003c\/li\u003e\n  \u003cli\u003eStainless steel 430 construction and removable crumb trays support food-safe hygiene standards and make routine cleaning straightforward.\u003c\/li\u003e\n  \u003cli\u003eAustralian-made with user-replaceable high-temperature lights and height-adjustable feet, supporting long service life and easy levelling on uneven floors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDual heating elements and dual fans for consistent, even temperature distribution throughout the cabinet.\u003c\/li\u003e\n  \u003cli\u003eDual-thermostat control: a holding temperature thermostat for normal operation and a separate pre-heating thermostat for rapid heat-up.\u003c\/li\u003e\n  \u003cli\u003eTimer-controlled pre-heat function: can be set to a higher temperature for up to 90 minutes before automatically reverting to the holding thermostat.\u003c\/li\u003e\n  \u003cli\u003eCapacity for up to 8 standard wire bakers racks, each measuring 737 x 457 mm (18 inch).\u003c\/li\u003e\n  \u003cli\u003eEach bakers rack can accommodate 2 x 1\/1 gastronorm pans, enabling versatile product presentation.\u003c\/li\u003e\n  \u003cli\u003eTotal holding capacity of approximately 200 pies.\u003c\/li\u003e\n  \u003cli\u003eEasy-fill humidity trays (x2) to help maintain moisture and prevent products from drying out.\u003c\/li\u003e\n  \u003cli\u003eRemovable crumb trays for straightforward cleaning.\u003c\/li\u003e\n  \u003cli\u003eControl side: lift-off hinged doors for easy full-rack loading and end-of-day cleaning.\u003c\/li\u003e\n  \u003cli\u003eDisplay side: fixed glass for clear product visibility (sliding glass option available).\u003c\/li\u003e\n  \u003cli\u003eStainless steel 430 construction for durability and food safety compliance.\u003c\/li\u003e\n  \u003cli\u003eFully insulated cabinet for improved energy efficiency.\u003c\/li\u003e\n  \u003cli\u003eUser-replaceable high-temperature internal lights.\u003c\/li\u003e\n  \u003cli\u003eHeight-adjustable feet for levelling on uneven surfaces.\u003c\/li\u003e\n  \u003cli\u003e2300W power draw on a standard 10-amp single-phase supply.\u003c\/li\u003e\n  \u003cli\u003eOptional HT200 trolley available for ease of placement and mobility.\u003c\/li\u003e\n  \u003cli\u003eAustralian-made product with a 12-month warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWidth (mm): 880\u003c\/li\u003e\n  \u003cli\u003eDepth (mm): 640\u003c\/li\u003e\n  \u003cli\u003eHeight (mm): 975\u003c\/li\u003e\n  \u003cli\u003eWeight (kg): 370\u003c\/li\u003e\n  \u003cli\u003eShipping Weight: 120\u003c\/li\u003e\n  \u003cli\u003eShipping Cubic: 0.924\u003c\/li\u003e\n  \u003cli\u003ePacked Width (mm): 635.0\u003c\/li\u003e\n  \u003cli\u003ePacked Height (mm): 972.0\u003c\/li\u003e\n  \u003cli\u003ePacked Depth (mm): 878.0\u003c\/li\u003e\n  \u003cli\u003eCapacity (Litres): 200 pies\u003c\/li\u003e\n  \u003cli\u003ePower Delivery: 2300w\u003c\/li\u003e\n  \u003cli\u003eWarranty (months): 12 months\u003c\/li\u003e\n  \u003cli\u003eCountry of Origin: Australia\u003c\/li\u003e\n  \u003cli\u003eAustralian Made Logo: YES\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Roband","offers":[{"title":"Default Title","offer_id":53852046950768,"sku":"RB-H200F","price":4017.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/3674\/3536\/files\/roband-heat-n-hold-food-warmer--fixed-glass-on-display-side-RB-H200F.jpg?v=1780126169","url":"https:\/\/atlanticequipment.com.au\/products\/roband-heat-n-hold-food-warmer-fixed-glass-on-display-side","provider":"Atlantic Equipment","version":"1.0","type":"link"}